Terminal & Fuse Blocks
ClassT-Shirt Fuse Block
ClassT-Shirt Fuse Block Clear Lexan cover insulates all conductive parts, satisfying ABYC/USCG requirements. For use on systems up to 160V DC Large stud terminals (3/8) accept ring terminals for wire up to 0000 AWG. Large heat dissipating tin-plated copper mounting blocks.
3AG Fuse Block System
3AG Fuse Block System Features clear insulating cover w/label recesses for labels. The cover insulates all conductive parts, satisfies ABYC/USCG requirements, and stores spare fuses. Fuse clips give full 30 Ampere rating per circuit.
Fuse/Breaker Block
Fuse/Breaker Block 10 gang fuse block will accept either ATO or ATC fuses or breakers up to 30 amps. All terminations are made through tin plated copper push on 1/4\" tab terminals. The base is made of glass reinforced polyester.
Terminal Block - 10 Gang
Terminal Block - 10 Gang 10 gang, heavy duty bus bar. Use as a common hot feed or common ground feed. Heavy plastic base with solid brass terminal bar and #10-32 thread screws. Two 1/4\"-20 stud terminals for power connection. Corrosion resistant.
Fuse/Terminal Block
Fuse/Terminal Block Heavy duty black molded plastic base. Use with SFE or AGC fuses up to 20 amps. Brass fuse clips and #8-32 terminal screws. A separate bus bar for ground or unfused common hot feed. Stud terminals for power/ground main connections. Corrosion resistant.
Fuse Block Ato With Ground
Fuse Block Ato With Ground Clear insulating cover with label recess for small format Blue Sea Systems labels Cover insulates all conductive parts, satisfying ABYC/USCG requirements. Tin-plated copper buses and fuse clips give 30 Ampere rating per circuit.
Fuse/Breaker Block
Fuse/Breaker Block Heavy duty black molded base and brass fuse clips and bus bar. Use with SFE or AGC fuses or breakers up to 20 amps per circuit.
Terminal Blocks with 2 Bus bars
Terminal Blocks with 2 Bus bars Black molded base with two solid brass bus bars and #8-32 threaded screws. Corrosion resistant.
Terminal Block
Terminal Block Use as a common hot feed or common ground feed. Heavy plastic base with solid brass terminal bar and #10-32 thread screws. Two 1/4\"-20 stud terminals for power connection. Corrosion resistant.