Bilge Pumps
3-Way Panel Switche W/ Indicator Light
3-Way Panel Switche W/ Indicator Light Rule's 3-Way Panel Switches offer a means to achieve that extra bit of control over any bilge pump with an automatic float switch. Toggles have three positions (automatic, off, or manual). Black stainless steel panel.
Bilge Pump - 2000 GPH
Bilge Pump - 2000 GPH Rule's completely submersible, non-automatic bilge pumps offer good performance at a value price.
3-Way Panel Switch
3-Way Panel Switch Rule's 3-Way Panel Switches offer a means to achieve that extra bit of control over any bilge pump with an automatic float switch. Toggles have three positions (automatic, off, or manual). Black stainless steel panel.
Rule Fully-Automatic Bilge Pump - 500 GPH
Rule Fully-Automatic Bilge Pump - 500 GPH Rule's completely submersible, fully-automatic bilge pumps eliminate the need for external float switches.
Series Full Automatic Pump - 1100 GPH
Series Full Automatic Pump - 1100 GPH The Rule-Mate Series of fully automated bilge pumps contain the pump and the non-mercury float switch in a single, compact housing. As the water level rises, so does the float switch, activating the pump when the water level reaches 2-1/8'.
Direct-Drive Bilge Pump
Direct-Drive Bilge Pump Although relatively inexpensive, this pump has the performance and features of higher priced pumps.
Automatic Float Switch
Automatic Float Switch The Automatic Float Switch converts any bilge pump that draws 12-amps (at 12 VDC) or less to fully automatic operation. It features a compact, low profile design that mounts on any surface from horizontal up to a 24 angle.
Waterbuster Cordless Pump
Waterbuster Cordless Pump The handy Water-Buster Portable Pump gives you compact and cordless pumping flexibility at up to 200 gallons per hour. Great for pumping out bilges, water tanks, skiffs, and runabouts. Runs for up to 5 hours on 3 D sized alkaline batteries.
Mounting Bracket For 450
Mounting Bracket For 450 Permits small Rule bilge pumps to be side mounted to a vertical stringer, a bulkhead or a transom. Use this bracket when bottom mounting in inconvenient or "impossible" places. Simply remove the strainer from pump, put the bracket in place and reassemble.
3-Way Rocker Panel Bilge Switch
3-Way Rocker Panel Bilge Switch Controls any pump equipped with an automatic float switch.